| Industrial inkjet | Prints a visible code, dot, line, or symbol using ink droplets. | Production-line sorting, reject identification, packaging, and work-in-process tracking. | Suitable inks are available for many metals, plastics, glass, paper, and coated surfaces. | Usually temporary to semi-permanent; depends on ink, surface, and exposure conditions. | Non-contact, fast, and easy to integrate with conveyors and automated inspection systems. | Ink adhesion and drying can vary by surface; consumables and maintenance are required. | High-throughput lines that need visible marks or printed identifiers. |
| Laser marking | Uses a focused laser to alter, engrave, or discolor the surface. | Permanent defect identification, part traceability, and marking on components or assemblies. | Many metals and selected plastics; results depend on material composition and laser settings. | Generally permanent and resistant to abrasion, with performance dependent on the material and mark depth. | No ink or labels; non-contact and capable of precise, repeatable marks. | Higher equipment and safety requirements; some materials may discolor poorly or be damaged. | Parts requiring durable marks and controlled, repeatable positioning. |
| Dot peen marking | A stylus makes a pattern of small indentations in the surface. | Identification and traceability of metal parts, including larger or rugged components. | Primarily metals and other materials that can withstand mechanical indentation. | Permanent; the indentations remain visible after surface wear, subject to process conditions. | Does not rely on ink; suitable for durable identification in demanding environments. | Contact-based and can be noisy; may be unsuitable for thin, delicate, or brittle parts. | Robust metal components where a lasting physical mark is acceptable. |
| Printed labels | Applies a printed adhesive label carrying a defect code, text, or barcode. | Warehouse handling, repair workflows, product quarantine, and batch or serial tracking. | Most clean, dry surfaces that are compatible with the selected label adhesive. | Removable or replaceable; durability depends on label stock, adhesive, and environment. | Can carry detailed information and machine-readable codes; easy to change or remove. | Labels may peel, become damaged, or be unsuitable for hot, wet, oily, or rough surfaces. | Processes needing detailed records or removable identification. |
| Paint marker or chalk | An operator manually applies a colored line, dot, or symbol. | Rework areas, incoming inspection, maintenance, and low-volume or offline sorting. | Many visible surfaces, subject to marker compatibility and surface cleanliness. | Varies from temporary to relatively durable, depending on the marking material and conditions. | Simple, portable, and quick to deploy without a fixed marking station. | Mark placement and legibility depend on the operator; difficult to automate consistently. | Manual inspection, small batches, or temporary shop-floor identification. |
| Vision-guided marking system | A camera locates the defect; a connected printer, laser, or other marking device applies the mark. | Automated inspection and sorting where defect position or product orientation varies. | Depends on the selected marking device, surface, and inspection setup. | Depends on the marking method integrated with the vision system. | Can connect defect location and inspection results to automated marking and data records. | Requires suitable lighting, validated inspection rules, system integration, and ongoing calibration. | Automated lines that need marks aligned with detected defects. |
| Selection note: There is no single best method for every application. The choice depends on material, required mark life, line speed, defect visibility, traceability needs, operating environment, and whether marking is manual or automated. Validate the selected method on the actual part and production process before deployment. |