| How it measures | Uses electromagnetic induction to measure the velocity of a conductive liquid. | Uses sound-wave transit time or Doppler shift; the suitable method depends on the liquid and meter design. | A flowing liquid turns a rotor; rotor speed is related to flow rate. | Measures liquid in repeated, defined chambers as internal elements move. |
| Best-fit applications | Conductive water in distribution, wastewater, process lines, and irrigation. | Clean-water lines, monitoring where a non-invasive clamp-on installation is useful, and some applications with suspended material when the meter supports Doppler measurement. | Relatively clean, low-viscosity water where a compact meter and suitable flow conditions are available. | Small flows, service connections, and applications where measuring lower flow rates is important. |
| Liquid requirements | The liquid must have sufficient electrical conductivity. Check the meter’s minimum conductivity and material compatibility. | Transit-time meters generally work best with liquids that transmit sound reliably. Bubbles, solids, pipe lining, and pipe condition can affect readings. | Particles and debris can affect the rotor and measurement. Confirm the permitted liquid condition and filtration requirements. | Liquid cleanliness and viscosity can affect performance; check the design’s limits for solids and fluid properties. |
| Moving parts | No moving parts in the measuring tube. | No moving parts in the measurement path; clamp-on versions mount outside the pipe. | Has a moving rotor, which can wear or be affected by debris over time. | Has moving internal elements and chambers. |
| Pressure loss | Typically very low because the measuring tube has no obstruction in the flow path. | Typically very low; clamp-on meters do not obstruct the pipe. | Flow passes through the rotor, so pressure loss may occur; consult the product’s pressure-drop data. | Internal measuring elements can create pressure loss; verify the manufacturer’s data for the selected size and flow. |
| Installation considerations | Requires a correctly grounded installation and suitable full-pipe conditions. Check straight-run and orientation requirements. | Clamp-on installation requires suitable access, pipe material, pipe dimensions, and surface condition. In-line designs have their own installation requirements. | Follow the specified flow direction, orientation, and straight-run requirements; protect the meter from unsuitable debris. | Check flow direction, orientation, operating pressure, and the required installation position. |
| Maintenance considerations | Inspect electrodes and liners where liquid deposits or corrosion may be an issue. | Clamp-on units avoid wetted sensor maintenance, but coupling, alignment, and pipe data still need attention. In-line units require model-specific checks. | Rotor condition and cleanliness may require inspection, particularly where water contains particles. | Internal moving components may require inspection or servicing according to water quality and operating conditions. |
| Smart data and integration | Depending on the model, outputs may include pulse, analog, or digital communications. | Depending on the model, outputs may include pulse, analog, or digital communications; clamp-on capability does not guarantee a particular protocol. | May provide pulse or other outputs, depending on the meter and transmitter configuration. | May provide pulse or other outputs, depending on the meter and transmitter configuration. |
| What to confirm before purchase | Conductivity, pipe size, liner and electrode materials, flow range, pressure rating, accuracy conditions, and required outputs. | Measurement method, pipe material and dimensions, liquid condition, installation access, flow range, accuracy conditions, and required outputs. | Minimum and maximum flow, water cleanliness, pressure loss, installation requirements, wear expectations, and output options. | Minimum flow, liquid cleanliness and viscosity, pressure loss, pressure rating, service needs, and output options. |