| Inductive proximity | Detects metal targets without contact using an electromagnetic field. | Typically a few millimeters to a few centimeters, depending on sensor size and target metal. | Discrete PNP or NPN transistor; normally open or normally closed variants are common. | Metal-part presence, machine-position detection, and conveyor counting. | Sensing distance varies with target material and size; check flush-mounting requirements. |
| Capacitive proximity | Responds to changes in capacitance, allowing detection of conductive and some nonconductive materials. | Usually a few millimeters to a few centimeters; setup and material affect the usable distance. | Discrete transistor or relay output, depending on design. | Liquid or powder level detection through nonmetallic container walls, and detection of plastic or grain. | Moisture, buildup, and nearby materials can affect switching; sensitivity adjustment may be useful. |
| Photoelectric, through-beam | Detects interruption of a light beam between a separate emitter and receiver. | Often several meters or more, depending on the model and conditions. | Discrete transistor or relay output. | Object counting, package detection, and presence sensing across wider gaps. | Requires mounting and alignment of both units; opaque targets provide the most dependable interruption. |
| Photoelectric, retroreflective | Uses a reflector to return light to the sensor; a target is detected when it interrupts the beam. | Commonly from a few centimeters to several meters, depending on the sensor and reflector. | Discrete transistor or relay output. | Conveyor object detection where wiring both sides of the detection point is inconvenient. | Highly reflective targets may need a polarization filter; keep the reflector clean and aligned. |
| Photoelectric, diffuse-reflective | Detects light reflected directly from the target to the sensor. | Typically a few centimeters to around a meter; target color, surface, and angle affect performance. | Discrete transistor or relay output. | Part presence, short-range conveyor detection, and basic position confirmation. | Test against the actual target because dark, shiny, or angled surfaces can change the sensing distance. |
| Ultrasonic distance sensor | Measures the time taken for an emitted sound pulse to return from a target. | Ranges vary widely, from a few centimeters to several meters. | Discrete switching, analog voltage/current, or digital communication, depending on model. | Distance measurement and level detection for many solid or liquid targets. | Foam, soft materials, narrow targets, airflow, and temperature can affect readings; observe the dead zone. |
| Mechanical limit switch | A moving object actuates a lever, plunger, or roller to change electrical contacts. | Contact-based; actuation travel and force depend on the switch design. | Mechanical contacts, commonly configured as normally open or normally closed. | End-of-travel detection, guarding interlocks, and machine-position confirmation. | Check contact rating, mechanical life, actuator style, and suitability for the required safety function. |
| Magnetic cylinder sensor | Detects a magnet in a pneumatic cylinder piston through the cylinder wall. | Detects piston position at the sensor’s mounting point; it does not typically measure full travel continuously. | Reed-switch contact or solid-state transistor output. | Confirmation of cylinder extended or retracted position. | Match the sensor and mounting hardware to the cylinder profile and output circuit. |
| Pressure transmitter | Converts applied fluid or gas pressure into an electrical signal. | Available ranges include vacuum, low pressure, and high pressure; select a range suited to the process. | Common industrial signals include 4–20 mA and 0–10 V; switching versions are also available. | Hydraulic and pneumatic monitoring, pump systems, and process pressure measurement. | Check pressure type, media compatibility, connection, overpressure rating, and required accuracy. |
| Temperature sensor | Measures temperature using a resistance element, thermocouple, or other sensing element. | Range depends on the sensing element, sheath, and transmitter; Pt100 RTDs are common for industrial temperature measurement. | Resistance or millivolt signal from the element; transmitters commonly provide 4–20 mA. | Monitoring motors, tanks, pipes, ovens, and process equipment. | Choose the element, probe construction, response time, insertion depth, and temperature range for the process. |