| Hardness | Commercial TPV grades commonly span approximately 40–95 Shore A. | Lower-hardness grades generally feel softer and can suit seals and grips; higher-hardness grades can provide a firmer feel and greater resistance to deformation. Hardness alone does not predict overall performance. | Compare Shore A values measured using the same method, such as ASTM D2240 or ISO 48-4. |
| Tensile strength | Many general-purpose TPV grades are in the approximate range of 3–10 MPa; formulation and test conditions affect results. | Useful for assessing resistance to pulling forces, but should be considered alongside elongation, part design, and operating conditions. | Request the grade’s test report and compare results measured by the same method, such as ASTM D412 or ISO 37. |
| Elongation at break | Values of roughly 200–600% are common across many TPV grades, with substantial grade-to-grade variation. | Indicates how far a specimen can stretch before breaking. It can help screen flexible parts, but does not by itself predict tear resistance or service life. | Compare results from the same specimen type, conditioning, and test method, such as ASTM D412 or ISO 37. |
| Compression set | There is no single representative value for all TPVs. Results depend strongly on grade, temperature, duration, and test procedure. | Important for gaskets and seals that need to recover after prolonged compression. Lower results under the relevant test conditions generally indicate better recovery. | Compare values only at identical conditions, including temperature and duration; request ASTM D395 or ISO 815-1 results. |
| Service-temperature limits | Many TPV grades are used across temperatures in the approximate region of −40°C to +120°C, but the allowable continuous range is grade- and application-specific. | Heat, cold, load, and exposure time can change flexibility and aging performance. A short-term peak temperature is not the same as a continuous-use rating. | Obtain the supplier’s continuous and intermittent temperature guidance and validate it under the part’s actual conditions. |
| Weathering and ozone resistance | EPDM-based TPVs are generally selected for good resistance to outdoor weathering and ozone; performance varies with formulation and stabilization. | Relevant for exterior seals, covers, and components exposed to sunlight, air, and changing weather. | Ask for aging or ozone test data that reflects the intended exposure; do not assume all grades have identical UV performance. |
| Oil, fuel, and chemical compatibility | Resistance depends on the specific liquid, concentration, temperature, and exposure time. TPV should not be assumed compatible with every oil or fuel. | Swelling or property changes can affect dimensions, sealing force, and part function. Other elastomers may be more suitable for demanding oil or fuel exposure. | Test the actual grade in the actual fluid using relevant conditions; ASTM D471 or ISO 1817 can be used for liquid-immersion testing. |
| Density and part weight | Many unfilled TPV compounds have a density broadly around 0.88–1.00 g/cm³, depending on formulation and additives. | Density affects material usage and part weight, but lower density alone does not establish better mechanical or processing performance. | Compare grade-specific density data measured by a consistent method, such as ASTM D792 or ISO 1183-1. |
| Processing and reprocessing | TPV is a thermoplastic vulcanizate: it can generally be melt-processed using suitable thermoplastic equipment. Reprocessing performance depends on the grade and processing history. | Check molding or extrusion compatibility, process stability, and whether any regrind is permitted for the intended part and quality requirements. | Request processing guidance and validate the material on the intended equipment. Reprocessability does not guarantee collection or recycling in every region. |
| Regulatory and market requirements | Compliance is grade-specific and depends on the destination market, application, and applicable regulation. | Food contact, potable water, automotive, electrical, and other uses can have different requirements. Compliance should never be inferred from the TPV material family alone. | Request current, grade-specific declarations and supporting documents for each target market and end use. |