| 1 | PCAP engineering capability | 15% | Ability to design the sensor, controller configuration, cover lens, and firmware for the intended application. | Review a design proposal, controller configuration, firmware change process, and test results from a comparable project. | Can explain design trade-offs and show repeatable validation for the requested screen size, interface, and use conditions. |
| 2 | Product range and customization | 12% | Available sizes, cover-lens options, bonding methods, interfaces, and support for custom shapes or cut-outs. | Compare a published product catalogue with a sample drawing and a written specification for the proposed configuration. | Provides clear limits, drawings, and change-control details instead of relying on unsupported claims of universal customization. |
| 3 | Optical performance and bonding | 12% | Optical transmission, reflection, haze, appearance, and suitability of air or optical bonding for the display assembly. | Request measurements for the actual proposed stack-up and inspect samples under the intended lighting conditions. | Supplies defined test methods and configuration-specific results; optical figures are not presented without a stated measurement method. |
| 4 | Touch performance and environmental operation | 12% | Touch accuracy, multi-touch behavior, response, and operation with relevant gloves, moisture, or environmental conditions. | Run application-specific trials using the intended host system, glove type, water conditions, and operating environment. | Performance claims are demonstrated on the proposed hardware and firmware under documented test conditions. |
| 5 | Electrical and EMC validation | 10% | Immunity to electrostatic discharge and other electromagnetic disturbances relevant to the end product. | Review test reports for the applicable product configuration. IEC 61000-4-2 is a recognized test method for electrostatic-discharge immunity. | Reports identify the tested configuration, test levels, setup, and results; compliance is not inferred from the test-method name alone. |
| 6 | Quality management and traceability | 10% | Documented production controls, inspection procedures, nonconformance handling, and lot or material traceability. | Check the scope and validity of any ISO 9001 certificate, and review sample inspection records and corrective-action procedures. | Quality records are linked to the relevant site and product scope, with a clear process for investigating and closing defects. |
| 7 | Manufacturing and process control | 9% | Control of sensor processing, printing, lamination or bonding, assembly, and final inspection. | Review the process flow, critical inspection points, equipment maintenance records, and a sample production-control plan. | Can explain which processes are performed in-house or by suppliers and how process changes are controlled. |
| 8 | Reliability and product-life testing | 8% | Resistance to the thermal, humidity, mechanical, and usage conditions specified for the application. | Request test plans and reports matched to the product construction and intended operating environment. | Test conditions, sample quantities, acceptance criteria, and results are documented and traceable to the proposed design. |
| 9 | Supply capacity and delivery control | 7% | Capacity planning, component sourcing, lead-time management, and contingency planning for production interruptions. | Request a project-specific production schedule, capacity assumptions, and an explanation of critical-material sourcing. | Delivery commitments are supported by a realistic schedule and a defined process for communicating supply risks. |
| 10 | Technical support and documentation | 5% | Availability of integration guidance, interface documentation, sample support, issue tracking, and after-sales assistance. | Review a sample specification, installation guide, interface document, and the proposed escalation and response process. | Provides consistent, version-controlled documentation and assigns clear technical contacts for integration and quality issues. |