| Sensor type and target | Specify the sensing technology—such as inductive, capacitive, photoelectric, ultrasonic, or magnetic—and describe the target material, size, shape, and movement. Confirm that the proposed sensor suits the actual target and installation environment. |
| Sensing distance | State the required operating distance and acceptable tolerance. Ask for the rated sensing distance and the test conditions used in the datasheet; actual detection can vary with target material, dimensions, alignment, and mounting. |
| Electrical output | Define the required output type, such as PNP or NPN, normally open (NO) or normally closed (NC), or an analog signal such as 4–20 mA or 0–10 V where applicable. Match the output to the controller input. |
| Supply voltage | Give the machine’s available supply and acceptable range. A common industrial DC requirement is 10–30 V DC, but the selected sensor’s datasheet and the control system’s limits must be checked. |
| Switching performance | Specify the required response or switching frequency and the operating speed of the target. Request the sensor’s published switching-frequency or response-time data and verify it is suitable for the application. |
| Housing and installation | Record the required housing shape, dimensions, mounting method, sensing-face position, and available clearance. For replacements, compare mechanical drawings and mounting dimensions rather than relying on appearance alone. |
| Environmental protection | Define exposure to dust, water, oil, cleaning, vibration, and temperature. If ingress protection is important, request the stated IP rating and its supporting product documentation; IP ratings are classified under IEC 60529. |
| Temperature range | Provide the expected ambient and process temperatures, including any temperature extremes. Confirm the sensor’s specified operating range and whether cable or connector limits differ from the sensor body. |
| Connection and cable | Specify connector or cable termination, connector size and pin count, cable length, and wiring requirements. For example, M12 connectors are widely used in industrial automation, but pin assignments must be verified against the datasheet. |
| Standards and documentation | Identify the standards and market-access documentation required for the destination and machine. Request the current datasheet, wiring diagram, dimensional drawing, declarations or certificates where applicable, and installation instructions. |
| Supplier capability | Ask the supplier to confirm the exact product specifications, product condition, traceability, warranty terms, and ability to provide technical support. Request written confirmation of any proposed substitute’s electrical and mechanical compatibility. |
| Commercial requirements | State the required quantity, delivery location, target delivery date, packaging needs, and whether samples are needed. Request a dated quotation that clearly lists unit price, shipping terms, lead time, and any minimum order quantity. |