| 1. Verify the material | Check the exact material grade, condition, and any required heat treatment or coating. Do not rely on a generic description such as “stainless steel.” | Specify a defined grade, such as 304 stainless steel, where it suits the application; confirm that the grade meets the required corrosion, strength, and temperature conditions. | Material certificate, product specification, or a written grade declaration tied to the supplied part. |
| 2. Check every critical dimension | Compare the drawing or dimensioned product data with the mating parts. Confirm units, reference surfaces, hole locations, and overall dimensions. | A 25.00 mm feature with a stated ±0.10 mm tolerance has an acceptable range of 24.90–25.10 mm. Confirm that this range works with the assembly. | Dimensioned drawing, CAD model, and a measurement report for critical features. |
| 3. Read the tolerances carefully | Look for individual tolerances, general tolerances, fit requirements, and geometric tolerances. Check which dimensions are controlled and how they are measured. | A drawing may specify a tighter tolerance for a bearing seat than for an overall length. Do not assume a general tolerance applies unless the drawing identifies it. | A complete drawing with a stated tolerance system and inspection requirements. |
| 4. Confirm threads and fits | Check thread system, nominal size, pitch, handedness, and tolerance class. For shafts and holes, confirm the required fit rather than just the nominal size. | An ISO metric thread specified as M8 × 1.25 identifies an 8 mm nominal diameter and 1.25 mm pitch. Confirm the required thread tolerance class and whether the thread is internal or external. | Thread callout on the drawing; applicable references may include ISO 261 for metric thread series and ISO 965 for thread tolerances. |
| 5. Identify the applicable standards | Confirm the standard number, edition where relevant, and the specific requirements it governs. A standards claim should match the part and application. | ISO 286 covers limits and fits for linear sizes; ISO 2768-1 provides general tolerances for linear and angular dimensions when referenced by a drawing. | Drawing notes, compliance statement, or inspection documentation identifying the applicable standard. |
| 6. Review finish and operating conditions | Check surface finish, coating, lubrication, temperature range, load, and exposure to moisture or chemicals where these affect performance. | For a sliding or sealing surface, confirm the specified roughness parameter and value on the drawing; “smooth finish” alone is not a measurable requirement. | Surface-finish callout, coating specification, and documented operating limits. |
| 7. Confirm inspection, quantity, and delivery details | Check the supplied quantity, revision level, inspection scope, packaging, lead time, and return or nonconformance process before ordering. | For a repeat order, match the part number and drawing revision to the approved design and clarify whether inspection reports are supplied for every batch. | Order confirmation, drawing revision, inspection plan, and written delivery terms. |