| 1. Match their experience to your parts and soils | Ask whether they have designed equipment for parts with similar materials, dimensions, geometries, and contaminants. Discuss the required cleanliness level and any restrictions on residues or surface changes. | Relevant, anonymized project summaries; sample process-flow descriptions; and a written review of your part drawings, soil types, and cleanliness requirements. | Cleaning results depend on the part, contaminant, solvent, and process conditions. Experience with a different application may not demonstrate suitability for yours. |
| 2. Confirm experience with vacuum hydrocarbon processes | Check that the proposed system is designed for hydrocarbon-solvent cleaning under vacuum, including the intended wash, rinse, and drying steps where applicable. | A process sequence, equipment layout, operating description, and explanation of how solvent handling, vacuum stages, and drying are integrated. | Equipment designed for another cleaning method may have different process requirements and may not provide the same results with hydrocarbon solvents. |
| 3. Examine solvent compatibility and safety engineering | Ask how wetted materials, seals, pumps, and process components are selected for the specified solvent. Review the machine’s risk assessment and the safeguards provided for its intended installation and operation. | Solvent compatibility information, safety documentation, operating instructions, and details of applicable protective measures. Confirm local regulatory requirements with qualified safety professionals. | Hydrocarbon solvents can be flammable. Safe equipment selection, suitable safeguards, and compliance with site and local requirements must be considered together. |
| 4. Verify process control and quality checks | Ask which parameters can be controlled and recorded, such as cycle steps, temperatures, vacuum conditions, and cleaning or drying times. Discuss how the process will be qualified for your parts. | Sample cycle records, control-system descriptions, acceptance-test plans, and a proposed method for checking cleanliness and drying performance against your specifications. | Documented controls and agreed acceptance criteria help determine whether the machine can repeatedly meet the required process outcome. |
| 5. Assess commissioning, service, and parts support | Clarify who will install and commission the machine, train operators, provide maintenance guidance, and supply service support for the intended operating location. | A commissioning scope, training plan, maintenance schedule, spare-parts list, warranty terms, and response arrangements for technical support. | Commissioning and ongoing support affect equipment availability, operator readiness, and the ability to maintain the cleaning process over time. |