| 1 | Compact hanging lantern | Built-in lithium-ion, approximately 2,000–3,000 mAh | USB-C input; confirm whether a cable is included | About 180–300 g | Confirm the housing material in the product specification; do not assume all plastic lanterns use ABS. | Check for a legible battery rating, charging input rating, and any stated ingress-protection rating. Verify what the stated rating covers. |
| 2 | Rechargeable tent lantern | Built-in lithium-ion, approximately 3,000–5,000 mAh | USB-C charging; some designs also provide a USB output | About 250–450 g | Look for ABS identification or an explicit ABS material statement in the manual or specification. | Check the battery voltage and capacity, charging instructions, and manufacturer safety documentation. Treat USB output as a feature, not proof of battery protection. |
| 3 | Lantern with replaceable cells | Three AA cells; alkaline or compatible rechargeable NiMH cells, as specified | Replaceable batteries; typically no built-in charging port | About 150–350 g, excluding spare cells | Check that the ABS housing and battery compartment are identified in the product information. | Confirm cell type and polarity markings inside the compartment. Do not mix cell chemistries, brands, or old and new cells unless the instructions explicitly allow it. |
| 4 | High-capacity area lantern | Built-in lithium-ion, approximately 5,000–10,000 mAh | USB-C input; some models include USB-A device output | About 400–800 g | Check whether ABS applies to the complete outer housing or only selected components. | Compare the labeled battery capacity and input/output ratings with the manual. If a certification or conformity mark is claimed, check the supporting documentation and the applicable market requirements. |
| 5 | Collapsible camping lantern | Built-in lithium-ion, approximately 1,500–3,000 mAh | USB-C or Micro-USB, depending on model; confirm the actual port | About 200–400 g | Inspect the material description and hinges or moving parts; a collapsible design may combine multiple materials. | Check for clear charging and battery warnings. An IP rating, if stated, applies only under the conditions described by its test rating and documentation. |
| 6 | Rechargeable lantern with solar panel | Built-in lithium-ion, approximately 2,000–5,000 mAh | Solar charging plus USB input; solar charging is generally dependent on sunlight and panel size | About 300–600 g | Confirm the housing material separately from the solar panel and any rubberized or transparent parts. | Check the USB input rating, battery details, and charging guidance. Do not rely on a small integrated solar panel as the sole charging method unless the maker specifies its expected performance. |
| 7 | Lightweight backpacking lantern | Built-in lithium-ion, approximately 1,000–2,500 mAh | USB-C or Micro-USB input | About 100–220 g | Verify that ABS is actually specified; lightweight models may use other plastics or mixed materials. | Check the battery and port ratings, plus any stated water-resistance limits. Keep charging ports covered and dry as directed by the instructions. |
| 8 | Lantern with emergency red-light mode | Built-in lithium-ion, approximately 2,000–4,000 mAh | USB-C input; some designs include USB device output | About 250–500 g | Check the material specification and whether the housing is described as ABS or a blend. | Look for battery charging and storage instructions. If an emergency or flashing mode is included, check how it is activated and whether it can be disabled. |
| 9 | Rugged-style camping lantern | Built-in lithium-ion, approximately 3,000–6,000 mAh | USB-C input; confirm whether a protective port cover is included | About 350–700 g | “Rugged” is not a material specification; verify ABS construction and inspect seams, fasteners, and port covers. | Look for a clearly stated IP rating and its supporting instructions. Do not interpret “water-resistant” or “rugged” wording alone as a certified rating. |
| 10 | Dual-power lantern | Built-in rechargeable lithium-ion plus replaceable cells, if specified | USB charging and/or replaceable-cell operation; confirm whether the modes can be used together | About 300–650 g | Check which parts use ABS and whether the battery door or housing has a stated material specification. | Follow the maker’s instructions for switching power sources. Check cell-type, polarity, charging, and battery-compartment warnings; never charge disposable cells. |