| Precision Metal-Film | A thin resistive metal-alloy film deposited on an insulating ceramic substrate and trimmed to value. | About ±0.1% to ±0.01%, depending on the part and specification. | Common precision grades are around ±5 to ±25 ppm/°C. | Good accuracy, low noise, and a useful balance of stability, size, and cost. | Signal conditioning, instrumentation, feedback networks, and precision voltage dividers. | Check the specified temperature range, power derating, voltage coefficient, and long-term stability for the intended operating conditions. |
| Bulk Metal-Foil | A patterned resistive metal-alloy foil bonded to a ceramic substrate; the foil geometry is designed for stable performance. | Common precision options range from about ±0.1% down to ±0.01% or tighter for selected designs. | Specialized parts can reach approximately ±0.2 to ±2 ppm/°C. | Very low TCR, strong long-term stability, and low sensitivity to changes in ambient temperature. | High-accuracy references, bridge circuits, precision measurement equipment, and calibration systems. | Often costs more than general-purpose film parts. Allow for self-heating, thermal gradients, and the specified mounting conditions. |
| Thin-Film Chip | A thin resistive film deposited on a ceramic chip, with the resistance pattern formed by trimming or photolithographic processes. | Common precision grades are approximately ±0.1% to ±0.01%. | Often specified in the range of about ±5 to ±50 ppm/°C, depending on construction and value. | Compact size, close matching options, and good performance in surface-mount assemblies. | Compact instrumentation, precision analog boards, and resistor networks where board space matters. | Confirm pulse and surge ratings, soldering requirements, and whether the application needs individual resistors or a matched network. |
| Matched Thin-Film Network | Two or more thin-film resistors fabricated on a shared substrate to improve ratio tracking and thermal matching. | Individual-element tolerance and ratio tolerance are specified separately; precision ratio options can be tighter than standalone parts. | Absolute TCR is design-specific; tracking TCR is often the more important specification for ratios. | Improved channel-to-channel matching and reduced relative drift compared with separately mounted resistors. | Differential amplifiers, ADC front ends, gain-setting circuits, and precision dividers. | Specify ratio tolerance, tracking TCR, operating temperature, and layout or package requirements explicitly. |
| Precision Current-Sense Shunt | A low-resistance metal-alloy element, commonly implemented as a stamped or deposited resistive element with suitable terminals. | Precision versions are commonly available around ±1% to ±0.1%; tighter options depend on design. | Varies by alloy and construction; low-TCR versions are available for measurement applications. | Designed for accurate current measurement, with low resistance and defined power handling. | Battery monitoring, power conversion, motor control, and current-feedback circuits. | Account for power dissipation, pulse loading, Kelvin connections, PCB copper effects, and temperature rise. |