| 1 | System-Level EMC Design | EMC planning for equipment and installations, including emission control and immunity to the industrial environment. | IEC 61000-6-2; IEC 61000-6-4 | Zoning, cable segregation, bonding, enclosure design, and installation reviews. | Factories, process plants, and industrial control installations. |
| 2 | Conducted-EMI Filtering | Reduction of unwanted conducted noise on power and signal connections. | IEC 61000-6-4; IEC 61000-4-6 | Common-mode and differential-mode filtering, feedthrough filtering, and careful filter placement. | Power supplies, control cabinets, and industrial communication lines. |
| 3 | Surge Protection | Protection against transient overvoltages coupled onto power, signal, and control ports. | IEC 61000-4-5; IEC 61643-11 | Surge protective devices, coordinated protection stages, and short, low-impedance connection paths. | Outdoor equipment, plant power distribution, and long field-cable runs. |
| 4 | EFT/Burst Immunity | Mitigation of fast transient disturbances commonly associated with switching and inductive loads. | IEC 61000-4-4 | Input filtering, transient suppression, robust reset behavior, and improved cable routing. | PLC I/O, relay circuits, motor control, and factory automation equipment. |
| 5 | ESD Protection | Improved resilience of accessible points and interfaces to electrostatic discharge. | IEC 61000-4-2 | Transient voltage suppression, chassis discharge paths, interface layout, and enclosure design. | Operator panels, touchscreens, connectors, and maintenance-accessible controls. |
| 6 | Radiated-RF Immunity | Reduction of susceptibility to radio-frequency electromagnetic fields. | IEC 61000-4-3 | Shielding, enclosure and seam control, filtered interfaces, and circuit-layout practices. | Control systems used near radios, wireless devices, or other RF sources. |
| 7 | Grounding, Bonding, and Shielding | Management of reference connections and electromagnetic coupling paths in installations. | IEC 61000-5-2; IEC 61000-6-2 | Equipotential bonding, shield termination, low-impedance connections, and separation of noisy and sensitive circuits. | Control cabinets, distributed automation, and plant-wide cable systems. |
| 8 | Drive and Motor EMC | EMC requirements and installation considerations for adjustable-speed electrical power drive systems. | IEC 61800-3 | Drive input filters, screened motor cables, appropriate shield bonding, and installation-specific measures. | Pumps, fans, conveyors, machine tools, and other motor-driven equipment. |
| 9 | Measurement and Control Equipment EMC | EMC requirements for electrical equipment used for measurement, control, and laboratory applications. | IEC 61326-1 | Protected analog inputs, filtered power, resilient digital interfaces, and application-appropriate testing. | Sensors, transmitters, data-acquisition equipment, and process instruments. |
| 10 | Machinery EMC Integration | Integration of electrical equipment, wiring, and control functions within machinery. | IEC 60204-1; applicable IEC 61000 series standards | Cabinet layout, wiring practices, bonding, interface protection, and verification of the assembled machine. | Industrial machines, production lines, and integrated automation systems. |